Alpine SPV-65X-WRA2-Way, 6-1/2" Marine-Grade Weather Resistant Component/Coaxial Speaker System for Select Jeep Wrangler JK vehicles. The SPV-65X-WRA is a complete speaker system upgrade that is Alpine engineered for the 2007-2018 Jeep Wrangler JK.
SOUND THAT’S OPTIMIZED FOR THE JK
These 6.5-inch speakers in the SPV-65X-WRA are tuned specifically for the JK’s in-cabin environment and fit into the factory speaker locations for an easy update that will impress your ears.
SPEAKERS BUILT FOR YOUR 2007-2018 JK
The SPV-65X-WRA comes with adapters that allow the speakers to be installed as a component set by mounting the tweeters into the tombstones of older JKs or onto the dash for newer JKs. For older JKs that have a sound bar, the adapters convert the speakers into a coaxial design so they can be installed into the sound bar.
WEATHER RESISTANT
Driving with the top off is part of the fun of owning a Wrangler, but sometimes you get caught off-guard with the top down and inclement weather. The SPV-65X-WRA is weather resistant and rated IP55, so it’s protected from limited dust ingress and low-pressure water spray from any direction.
Alpine SPV-65X-WRA 2-Way, 6-1/2" Marine-Grade Weather Resistant Speaker System
FEATURES
- Designed to fit in select Jeep JK vehicles
- vehicle-specific component/coaxial speaker system
- two 6-1/2" woofers
- two 1" Teteron dome tweeter with inline crossover
- tweeters can be mounted separately or coaxially
- vehicle-specific installation gear and wiring adapters included
- 6.5-inch speakers which can be installed as a component or coaxial system, using the included adapters
- CTA-2031 Power Rating: 75W RMS, 225W Peak
- Nominal impedance 4 Ohm
- Frequency response 65-22kHz
- 1” Teteron dome tweeter
- Steel frame with factory speaker mounting tabs
- Weather resistant: IP55
- Includes vehicle specific speaker connectors
What's in the box:
- Alpine SPV-65X-WRA owner's manual
- 2 Woofers
- 2 Tweeters (with 5" wire attached)
- 2 Tweeter crossovers (in-line)
- 2 Polyfill sheets
- 2 Tweeter mounting plates
- 2 Bridge mount brackets
- 2 Bridge mount wire covers
- 2 Foam strips (0.25" x 0.625")
- 2 Alpine logo badges
- Warranty information
- On-line product registration information
- Important Notice sheet
- Installation instructions
- Specifications on box
TECH SPECS
Speaker Rating:
- Max RMS Power Capacity: 75W
- Peak Power Capacity: 225W
Estimated Installation Time: 1 Hour
(Professional Installation Recommended)