top of page

Alpine KTA-30MW Mono Weather Resistant Tough Power Pack Amplifier.  With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. 

 

A TOUGH MINI AMP THAT PACKS A PUNCH

 

Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycles saddlebags.

 

A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT

 

The KTA-30MW is perfect for when you want to add subwoofer power but don’t have the space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.

 

DYNAMIC PEAK POWER

 

The KTA-30MW features Alpine’s exclusive Dynamic Peak Power (D.P.P.) technology which intelligently adjusts the gain to automatically adapt to musical needs. D.P.P. prevents the amplifier from clipping music signals by supplying up to double the power to support power hungry, rhythmic peaks like a snare drums, trumpets, or high-hat cymbals. During these dynamic musical passages, D.P.P. instantly delivers bursts of power to rise to the peak demands of the music and very quickly rolls back down to maintain its efficiency. 

 

WEATHER RESISTANT FORMAT

 

The KTA-30MW is ready for your adventures. It is weather resistant, rated at IP66 for protection again dust ingress and high-pressure water spray.  Its rugged chassis and high-quality waterproof connector can be used in installations where it will be exposed to the outdoor elements.. 

 

HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS

 

The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like  under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue. 

 

 

Alpine KTA-30MW Mono Weather Resistant Tough Power Pack Amplifier

SKU: ALPKTA-30MW
$419.95Price
  • FEATURES

    • Compact mono subwoofer amplifier
    • 200 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms)
    • Class D amp technology
      • Dynamic Peak Power (DPP) circuit adds a burst of power when needed
    • Frequency response: 20-400 Hz
    • Variable low-pass filter (50-400 Hz at 24 dB/octave)
    • Variable bass boost (0-12 dB at 50 Hz)
    • Preamp and speaker-level inputs
      • Speaker wire to RCA adapters required for speaker-level inputs
    • Optional wired remote control available
    • Weather-resistant (IP66 rated) chassis and waterproof connectors
    • Wiring and hardware not included with amplifier
      • 10-gauge power and ground leads recommended
    • Fuse: 25A

     

    What's in the box:

    • Alpine KTA-30MW Tough Power Pack owner's manual
    • Mono amplifier
    • 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other end)
    • 4 Self-tapping screws (Length 3/4")
    • Connection sheet
    • Limited Warranty sheet
    • Thank you letter
  • TECH SPECS

    • Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
    • Weather resistant (IP66 rating)
    • CTA-2006-B Specifications: 300W RMS x 1 (2Ω/4Ω, 14.4V, ≤ 1% THD+N)
    • 600W x 1 D.P.P. (2Ω/4Ω, 14.4V, ≤ 1% THD+N)
    • 83dB S/N (ref. 1W into 4Ω)
    • ≤0.1% THD+N
    • OEM-grade Tyco 26-pin connector with pigtail wire harness
    • Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
    • Sound control
    • Crossovers: Variable Low Pass filter 50-400Hz @ -24dB/Oct.

           - Input gain settings (variable)
           - 2ch/4ch input (selectable)

bottom of page